Page 1 of 1

Harris G80 wiring

Posted: Sat Dec 08, 2012 2:39 pm
by ianselva
My Harris G80 blew either/both the battery and the regulator a while ago. I dont know which went first only that the battery went flat and then it blew the bulbs. I replaced the Battery , then found the regulator was faulty as well. The regulator was obsolete and I could only find a regulator off a CCM that fitted.
My problem is that the charging light has never worked . When I checked the loom it has been messed about a lot and only partly agrees with the official diagram. Everything now works except the charge light.
I am prepared to wire in the charge light separately if someone can tell me where it connects to. I assume that one side of the light should connect to the battery live and the other side to the regulator earth side
?????

Thanks

Ian

Re: Harris G80 wiring

Posted: Sat Mar 02, 2013 4:28 pm
by ushbert
Just discovered your post in December.
Did you get a reply?

Re: Harris G80 wiring

Posted: Sat Mar 02, 2013 11:57 pm
by Eamonn
Albert, since Ian is not a club member and he has passed his 90 day access allowance, he unfortunately will not be able to respond.