Harris G80 wiring

Information related to the Harris Matchless (also known as Devon Matchless)
Post Reply
ianselva
Posts: 336
Joined: Wed Oct 12, 2005 10:45 pm
Location: OXON UK

Harris G80 wiring

Post by ianselva »

My Harris G80 blew either/both the battery and the regulator a while ago. I dont know which went first only that the battery went flat and then it blew the bulbs. I replaced the Battery , then found the regulator was faulty as well. The regulator was obsolete and I could only find a regulator off a CCM that fitted.
My problem is that the charging light has never worked . When I checked the loom it has been messed about a lot and only partly agrees with the official diagram. Everything now works except the charge light.
I am prepared to wire in the charge light separately if someone can tell me where it connects to. I assume that one side of the light should connect to the battery live and the other side to the regulator earth side
?????

Thanks

Ian
ushbert
Posts: 58
Joined: Mon Jan 01, 1990 12:00 am
Location: WOODBRIDGE UK

Re: Harris G80 wiring

Post by ushbert »

Just discovered your post in December.
Did you get a reply?
User avatar
Eamonn
Webmaster
Posts: 1927
Joined: Sun Jan 01, 1995 12:00 am
Location: OXFORDSHIRE UK
Contact:

Re: Harris G80 wiring

Post by Eamonn »

Albert, since Ian is not a club member and he has passed his 90 day access allowance, he unfortunately will not be able to respond.
Corners like a Lego man
Post Reply