You are truly down the rabbit hole now...
I found a couple more photos of clutch plates. This was as far as I got with my attempts to identify them all.
PS: yes, you'll need to resize photos to 640x480 or 800x600 to post them here.
1965 G2CSR Clutch play
- clanger9
- Posts: 1163
- Joined: Sat Jun 20, 2015 9:38 am
- Location: Chester, UK
Re: 1965 G2CSR Clutch play
You do not have the required permissions to view the files attached to this post.
1989 Moto Morini Dart 350
1993 Ducati 750SS
1993 Ducati 750SS
-
- Posts: 140
- Joined: Thu Oct 22, 2020 8:07 pm
- Location: Monmouthshire UK
Re: 1965 G2CSR Clutch play
You have really excelled in you pursuit in helping me. Thank youclanger9 wrote:You are truly down the rabbit hole now...
I found a couple more photos of clutch plates. This was as far as I got with my attempts to identify them all.
PS: yes, you'll need to resize photos to 640x480 or 800x600 to post them here.
It's a toss between basket 3 or 4 with the duplex chain.
I will take some measurements when I get into work this morning to clarify.
Looking back at your archive pictures. I have noticed the two duplex baskets have ( teeth ) at the bottom of the clutch centre. ( mine do not )
The internal shoulder of the baskets ( 3 and 4 ) are in good condition. My internal shoulder is like a brake disk. This tells me the plate is spinning in opposition and making contact with the basket.
I will double check when I get in this morning.
-
- Posts: 140
- Joined: Thu Oct 22, 2020 8:07 pm
- Location: Monmouthshire UK
Re: 1965 G2CSR Clutch play
The measurements are as follows...
Basket height from internal shoulder...1.0265" or 26.07mm.
Height/depth of clutch centre...1.589" or 40.36mm.
Cheers
Roger.
P.S. file still too large to upload
Basket height from internal shoulder...1.0265" or 26.07mm.
Height/depth of clutch centre...1.589" or 40.36mm.
Cheers
Roger.
P.S. file still too large to upload
- clanger9
- Posts: 1163
- Joined: Sat Jun 20, 2015 9:38 am
- Location: Chester, UK
Re: 1965 G2CSR Clutch play
If you have a "no teeth" basket with a duplex sprocket, then I'm pretty certain that is the correct CSR part (043444).
It should have the 7-plate CSR clutch pack (3x 043191, 3x 043192, 1x 043193). All of these are available from club spares.
From your description, it sounds like someone has tried to fit a standard 250 pack to your bike - understandable, given that there's no factory documentation anywhere that explains the differences!
It should have the 7-plate CSR clutch pack (3x 043191, 3x 043192, 1x 043193). All of these are available from club spares.
From your description, it sounds like someone has tried to fit a standard 250 pack to your bike - understandable, given that there's no factory documentation anywhere that explains the differences!
1989 Moto Morini Dart 350
1993 Ducati 750SS
1993 Ducati 750SS
-
- Posts: 140
- Joined: Thu Oct 22, 2020 8:07 pm
- Location: Monmouthshire UK
Re: 1965 G2CSR Clutch play
There's no surprises there then..... Almost a completely new bike by the time I am finished.clanger9 wrote:If you have a "no teeth" basket with a duplex sprocket, then I'm pretty certain that is the correct CSR part (043444).
It should have the 7-plate CSR clutch pack (3x 043191, 3x 043192, 1x 043193). All of these are available from club spares.
From your description, it sounds like someone has tried to fit a standard 250 pack to your bike - understandable, given that there's no factory documentation anywhere that explains the differences!
My Kawasaki didn't cost as much as this
Thank you for,everything again.