Help finding bearings and telefork spares
-
- Posts: 6
- Joined: Thu Feb 18, 2021 7:54 am
- Location: Italy
Help finding bearings and telefork spares
Hello there,
I am new here and I am Italian.
I have 2 Matchless that I am restoring.
The first is an ARMA WD G3L Matchless
The second is a G3WO Matchless.
I need help with the teleforks and all the bearings.
In Italy we have metric unit as you know. I have some difficult to find the correct bearings for replace engine and gearbox.
Anyone can help me to find all the correct bearings?
Per example I need these:
CRANKCASE
- RLS-8 Ball bearing for driving side flywheel axle
- 16866 Spacing washer between ball bearings
- 16889-A Spacing collar between ball bearings
- R137 Rollers and cage for timing side axle
- 41-G3L-E29 Bush for timing side flywheel axle
GEARBOX
- 177X Ball bearing for main driving gear
- 68X Ball bearing for main shaft
- 115C Gland metal washer, dished
- 114C Gland outer wahser, for bearing
- 37-1-C-2 Metal wahser for mainshaft bearing
TELEFORKS Where I can find spares?
- STD806 Ball race, for handlebar lug
- 40-G12M-FF191 Bush, bottom for fix inner tube
- 40-G12M-FF190 Washer, for inner tube top bolt
- 40-G12M-FF41 Bush (fibre), guide for fork tube
- 40-G12M-FF91 Oil seal, for fork tube
- 40-G12M-FF95 Washer (paper), for oil seal
- 40-G12M-FF126 Washer (leather), seating, for spring
- STD 203 Washer (fibre), for oil level plug
- 40-G12M-FF80 Washer (fibre), for damper tube bolt
- STD-12 Washer, for speedometer bracket bolt
I visited many website, but unfortunately without success.
If anyone know where I can find spares, it would be a beautiful things.
AMC CLASSIC SPARES told me that he have, but for payment asked me the credit card numbers by phone or fax. It is not correct and could be dangerous for me.
I am sorry for the incorrect english.
Thank you all.
I am new here and I am Italian.
I have 2 Matchless that I am restoring.
The first is an ARMA WD G3L Matchless
The second is a G3WO Matchless.
I need help with the teleforks and all the bearings.
In Italy we have metric unit as you know. I have some difficult to find the correct bearings for replace engine and gearbox.
Anyone can help me to find all the correct bearings?
Per example I need these:
CRANKCASE
- RLS-8 Ball bearing for driving side flywheel axle
- 16866 Spacing washer between ball bearings
- 16889-A Spacing collar between ball bearings
- R137 Rollers and cage for timing side axle
- 41-G3L-E29 Bush for timing side flywheel axle
GEARBOX
- 177X Ball bearing for main driving gear
- 68X Ball bearing for main shaft
- 115C Gland metal washer, dished
- 114C Gland outer wahser, for bearing
- 37-1-C-2 Metal wahser for mainshaft bearing
TELEFORKS Where I can find spares?
- STD806 Ball race, for handlebar lug
- 40-G12M-FF191 Bush, bottom for fix inner tube
- 40-G12M-FF190 Washer, for inner tube top bolt
- 40-G12M-FF41 Bush (fibre), guide for fork tube
- 40-G12M-FF91 Oil seal, for fork tube
- 40-G12M-FF95 Washer (paper), for oil seal
- 40-G12M-FF126 Washer (leather), seating, for spring
- STD 203 Washer (fibre), for oil level plug
- 40-G12M-FF80 Washer (fibre), for damper tube bolt
- STD-12 Washer, for speedometer bracket bolt
I visited many website, but unfortunately without success.
If anyone know where I can find spares, it would be a beautiful things.
AMC CLASSIC SPARES told me that he have, but for payment asked me the credit card numbers by phone or fax. It is not correct and could be dangerous for me.
I am sorry for the incorrect english.
Thank you all.
- clive
- Member
- Posts: 5671
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LONDON UK
Re: Help finding bearings and telefork spares
Hi Andrea, welcome but please understand that as a new guest member your first few posts will be moderated so will not appear straight away, so please do not repeate them but wait patiently for one of the moderators to approve them. (This stops advertising and porn!)
Secondly there are real problems of delivery from the UK to the EU following changes in tax and paperwork as a result of the U.K. leaving which is causing blockages in delivery of goods by the couriers. It's so bad the club's spares department has suspended all EU deliveries until it is sorted out.
Finally Steven at AMC Classic Spares is very much a trusted supplier and anyone doing business with him will have to provide card details over the phone. If he has the goods and a courier who will deliver.......
Secondly there are real problems of delivery from the UK to the EU following changes in tax and paperwork as a result of the U.K. leaving which is causing blockages in delivery of goods by the couriers. It's so bad the club's spares department has suspended all EU deliveries until it is sorted out.
Finally Steven at AMC Classic Spares is very much a trusted supplier and anyone doing business with him will have to provide card details over the phone. If he has the goods and a courier who will deliver.......
clive
if it ain't broke don't fix
if it ain't broke don't fix
-
- Posts: 6
- Joined: Thu Feb 18, 2021 7:54 am
- Location: Italy
Re: Help finding bearings and telefork spares
Thanks and I apologize for the double post, I didn't notice the warning when I sent the first one.
For deliveries you gave me very bad news, I don't really know how to fix.
If anyone knows other sites maybe European that sell spare parts let me know please.
Another thing, for bearings there is a today's code? for example the bearing 68x is SKF6203
For deliveries you gave me very bad news, I don't really know how to fix.
If anyone knows other sites maybe European that sell spare parts let me know please.
Another thing, for bearings there is a today's code? for example the bearing 68x is SKF6203
- Rob Harknett
- Member
- Posts: 11211
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Help finding bearings and telefork spares
I suggest you join our club.
Spare parts are only sold to club members. All the parts you ask for have old part numbers. In circa 1952 AMC introduced new part numbers. You will need to know the new part numbers to search for the parts. A lot of the part numbers you give are not the AMC part numbers shown in your bikes Parts List.
I am Prewar Officer for the club. I help club members with problems like you have to identify parts. Prewar@ampot.com
Spare parts are only sold to club members. All the parts you ask for have old part numbers. In circa 1952 AMC introduced new part numbers. You will need to know the new part numbers to search for the parts. A lot of the part numbers you give are not the AMC part numbers shown in your bikes Parts List.
I am Prewar Officer for the club. I help club members with problems like you have to identify parts. Prewar@ampot.com
-
- Member
- Posts: 8561
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: Help finding bearings and telefork spares
Welcome to the forums, Andrea.
You have some wonderful projects!
Steven Surbey at AMC Classic Spares is a long time member of this club (and so was his father) and a rider of AMC motorbikes. He is completely trustworthy and a valued parts supplier.
Subscribing members can buy most spare parts from our own club spares service. Have a look here:
http://www.amoc-parts.com/store/comersu ... oducts.asp
You will need to convert old part numbers to the new numbers, for example by adding zeros to STD numbers to make it comprise 6 numbers. For example STD 806 is now 000806 and available from the spares service.
There is much help and information available to subscribing members and an excellent overhaul and specifications manual for your two bikes here:
http://archives.jampot.dk/book/Workshop ... ndards.pdf
Good luck!
You have some wonderful projects!
Steven Surbey at AMC Classic Spares is a long time member of this club (and so was his father) and a rider of AMC motorbikes. He is completely trustworthy and a valued parts supplier.
Subscribing members can buy most spare parts from our own club spares service. Have a look here:
http://www.amoc-parts.com/store/comersu ... oducts.asp
You will need to convert old part numbers to the new numbers, for example by adding zeros to STD numbers to make it comprise 6 numbers. For example STD 806 is now 000806 and available from the spares service.
There is much help and information available to subscribing members and an excellent overhaul and specifications manual for your two bikes here:
http://archives.jampot.dk/book/Workshop ... ndards.pdf
Good luck!
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
-
- Posts: 6
- Joined: Thu Feb 18, 2021 7:54 am
- Location: Italy
Re: Help finding bearings and telefork spares
Ok it is clear, I need the catalog for converting old parts into new parts. Thank you
What I mean is the commercial bearing name example the SKF 6203 which corresponds to matchless's bearing 68x.
What I mean is the commercial bearing name example the SKF 6203 which corresponds to matchless's bearing 68x.
- clive
- Member
- Posts: 5671
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LONDON UK
Re: Help finding bearings and telefork spares
I would also welcome Andrea to the club but he lives in Italy Spriddler so unfortunately cannot buy spares from the club until the Brexit nightmare has been resolved! ![Frustration :headbang:](./images/smilies/head.gif)
![Frustration :headbang:](./images/smilies/head.gif)
clive
if it ain't broke don't fix
if it ain't broke don't fix
-
- Member
- Posts: 8561
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: Help finding bearings and telefork spares
Yes, I did spot that he was in Italy.clive wrote:I would also welcome Andrea to the club but he lives in Italy Spriddler so unfortunately cannot buy spares from the club until the Brexit nightmare has been resolved!
It would seem from Andrea's comment about Steve Surbey asking for his credit card details that Steve is still shipping stuff and as Andrea needs quite a lot I was assuming he could order from 'us' as in the Rob's latest info re. goods to E.U. or use another carrier than UPS whose service seems be problematic.
Incidentally, I rec'd this last week from Wassells, who also use UPS........ajscomboman wrote:
However there appears to be no restriction on placing orders and having an International courier collect or a haulier who is willing to drive to the HQ and pick up the goods on his travels back home. Naturally the £135 minimum spend to avoid VAT has to remain and there will be a charge for picking and packaging in readiness for collection. The goods will still be subject to customs declarations and will be the buyers responsibility to ensure these are in place.
For the time being that appears to be all we can do to avoid the potential losses. It's a damn nuisance and inconvenience to our EU members but rest assured I'll keep an eye on the situation and implement any changes as and when we get the nod.
You do not have the required permissions to view the files attached to this post.
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
- ajscomboman
- Member
- Posts: 3962
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: Help finding bearings and telefork spares
Nev the situation is still hit miss and to make matters worse despite the notification about UPS today there was still nothing on their website indicating any issues, same goes for Parcel Force yet we know there are backlogs and this info is coming from several sources. 2 days ago we were notified not to ship to Germany using DHL and they have their own streamlined customs systems!!!
The International collections are also causing a headache as the forms we have to now fill in require that every item is specified along with the material it's manufactured from.
Mental and no need for it all according to the major shippers, just tit for tat going on.
![Frustration :headbang:](./images/smilies/head.gif)
![Frustration :headbang:](./images/smilies/head.gif)
The International collections are also causing a headache as the forms we have to now fill in require that every item is specified along with the material it's manufactured from.
![Frustration :headbang:](./images/smilies/head.gif)
![Frustration :headbang:](./images/smilies/head.gif)
Mental and no need for it all according to the major shippers, just tit for tat going on.
- clive
- Member
- Posts: 5671
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LONDON UK
Re: Help finding bearings and telefork spares
i am very surprised you are calling our spares tat let alone what you are paying for them with.
![Very Happy :rofl:](./images/smilies/rofl.gif)
![Very Happy :rofl:](./images/smilies/rofl.gif)
![Very Happy :rofl:](./images/smilies/rofl.gif)
![Very Happy :rofl:](./images/smilies/rofl.gif)
clive
if it ain't broke don't fix
if it ain't broke don't fix