12 volt conversion

This area contains links to posts within the forum area on various topics. It's designed to help you find the answers to the most common questions about AJS and Matchless machines.
Only club members can create entries witin this area.
User avatar
Eamonn
Webmaster
Posts: 2244
Joined: Sun Jan 01, 1995 12:00 am
Location: OXFORDSHIRE UK
Contact:

12 volt conversion

Post by Eamonn »

Information on converting from 6 volt systems to 12 volt systems

https://forum.jampot.com/sear ... mit=Search
Corners like a Lego man
User avatar
Eamonn
Webmaster
Posts: 2244
Joined: Sun Jan 01, 1995 12:00 am
Location: OXFORDSHIRE UK
Contact:

12 volt conversion

Post by Eamonn »

Corners like a Lego man
User avatar
Eamonn
Webmaster
Posts: 2244
Joined: Sun Jan 01, 1995 12:00 am
Location: OXFORDSHIRE UK
Contact:

12 volt conversion

Post by Eamonn »

An article specifically for Lightweights can be found here:

Click on this link for 6v to 12v conversion
https://www.jampot.com/article_read.asp?id=507
Corners like a Lego man
User avatar
Rob Harknett
Member
Posts: 11236
Joined: Mon Jan 01, 1990 12:00 am
Location: ESSEX UK

12 volt conversion

Post by Rob Harknett »

I just had a quick peep at this topic. I only clicked on the coversion page, where it details parts required, to convert from 6v to 12v.. Its not good, could cause a fire?? The parts required need to be corrected. You really should change the 6 volt horn to a 12 volt horn. Rob Harknett
User avatar
greasemonkey62
Posts: 562
Joined: Wed Jun 16, 2010 12:37 pm
Location: SOUTH YORKSHIRE UK

12 volt conversion

Post by greasemonkey62 »

I did a 12 volt conversion after lots of detail searching as I was uncertain if I should attemp it myself, I decided to have a go and found if done with care and time it was not too difficult at all, I got a 200 watt alternator from Paul Goffs that was a straight swop with the old one and a Boyers conversion kit complete with an induction discharge unit which allowed the points to remain in operation and pitting reduced dramatically, the bike looks no different to before the changes as the 2 tiny boxes are in the toolbox, but I have a bike thats starts first kick, ticks over superbly and a headlight more powerful than my newish car, a winning combination and well worth the initial headscratching.
User avatar
greasemonkey62
Posts: 562
Joined: Wed Jun 16, 2010 12:37 pm
Location: SOUTH YORKSHIRE UK

12 volt conversion

Post by greasemonkey62 »

P.S. My bike is a 1962 AJS model 31 650 twin.
alanjennings
Member
Posts: 1722
Joined: Thu May 10, 2007 5:26 pm
Location: NORTHANTS UK

Re: 12 volt conversion

Post by alanjennings »

Rob, I've run a6 volt horn on my V-----t, converted to12 volts, for nigh on 30 years and never had a problem!-famous last words!
Alan [Morini] Jennings
User avatar
Colin F
Member
Posts: 936
Joined: Mon Jan 01, 1990 12:00 am
Location: NORWICH UK
Contact:

Re: 12 volt conversion

Post by Colin F »

The problem with a 6 volt horn on a 12 volt system is that although it will work the resistance factors are wrong and can lead to the wire in the windings breaking down.
If they break and go open circuit (in other words the wire breaks and the ends are not touching) no current will flow and the horn will not work.

However if the wires break and are still touching they will start generating heat, fusing more and more of them together, drawing more current and in the end could catch fire (especially if there is no fuse in the circuit).

The real problem would come if your insurance company sent out an assessor and he noticed a 6 volt unit on a 12 volt system you would be very unlikely to get a pay out! :headbang:
Julian_S
Posts: 345
Joined: Fri May 31, 2013 7:57 pm
Location: Warrington, Cheshire

Re: 12 volt conversion

Post by Julian_S »

Colin F wrote:The problem with a 6 volt horn on a 12 volt system is that although it will work the resistance factors are wrong and can lead to the wire in the windings breaking down.
If they break and go open circuit (in other words the wire breaks and the ends are not touching) no current will flow and the horn will not work.

However if the wires break and are still touching they will start generating heat, fusing more and more of them together, drawing more current and in the end could catch fire (especially if there is no fuse in the circuit).

:
Given that a horn is only used for a few seconds at a time the chances of that happening would be significantly less than winning the euro millions. Sounds like a job for Mythbusters.....

The worst think that will happed is that it will just pack up.

Julian
billbeavis
Member
Posts: 38
Joined: Mon Jan 01, 1990 12:00 am
Location: OXFORDSHIRE UK

Re: 12 volt conversion

Post by billbeavis »

At the time I converted my alternator single to 12 volt I had also read it was suggested to keep the 6 volt horn so did just that. Initially it worked so I kept it. Then one night after leaving club meeting, a pal tooted in parting of our ways. I did the same only for the bike to stop on a dark country road. Turns out the horn failed and blew the one fuse I had in the loom. Not a big deal as I had spare fuses but it didn't take long to get a 12 volt horn after that. It was cheap and sits under the seat so can't be seen. Now I have one main fuse, one brakelight switch fuse and one main fuse. That way if the horn or rear brakelight fail short, the 'bike doesn't stop. Incidently I had a few years previously also converted a beetle to 12 volt and left the 6 volt horn in place. That had to go too eventually. :beer:
Locked