I am in the process of re-assmebling the headlamp shell on my 1961 G12 CSR and have a query on the ammeter wiring.
On disassembing the unit I marked the wiring posts as A & B, but now on reassembly I am not sure as the A & B are between two posts so I am not sure which is the terminal and which is that for the securing bracket. However, one set of posts/threads are thinner than the others, so any suggestions as to which are the terminals?
Note to self to be more specific when marking up things in the future!
Ammeter Wiring Posts
- AFPU
- Member
- Posts: 55
- Joined: Sun Oct 03, 2021 7:09 pm
- Location: New South Wales AUSTRALIA
- Location: Kenninghall
Ammeter Wiring Posts
You do not have the required permissions to view the files attached to this post.
Gary
"Any fool can make things complicated but it takes a genius to make things simple"
"Any fool can make things complicated but it takes a genius to make things simple"
- ajscomboman
- Member
- Posts: 3971
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: Ammeter Wiring Posts
Small ones for the bracket, the give away is looking at the ammeter in use, the terminal posts have to be the same as charge or discharge, the ammeter needle can't work north to south!
- AFPU
- Member
- Posts: 55
- Joined: Sun Oct 03, 2021 7:09 pm
- Location: New South Wales AUSTRALIA
- Location: Kenninghall
Re: Ammeter Wiring Posts
Many thanks!!ajscomboman wrote: ↑Mon May 09, 2022 6:41 pm Small ones for the bracket, the give away is looking at the ammeter in use, the terminal posts have to be the same as charge or discharge, the ammeter needle can't work north to south!
Problem solved.
Gary
"Any fool can make things complicated but it takes a genius to make things simple"
"Any fool can make things complicated but it takes a genius to make things simple"