Wheels
-
- Posts: 84
- Joined: Fri Aug 08, 2008 8:51 am
- Location: SURREY UK
Wheels
Not wanting to upset any purists out there but does anyone know what wheels can be swapped around from bike/model to bike
As in my 52 model 20 has half width hubs if i wanted to fit a full width front hub are there any straight swaps either from AMC or other makes.
I know you can engineer stuff to fit but just wondered if there is a known straight fitment with maybe a tls.
cheers
As in my 52 model 20 has half width hubs if i wanted to fit a full width front hub are there any straight swaps either from AMC or other makes.
I know you can engineer stuff to fit but just wondered if there is a known straight fitment with maybe a tls.
cheers
- Biscuit
- Deceased
- Posts: 3924
- Joined: Thu Jan 01, 1998 12:00 am
- Location: KENT UK
Wheels
1954 saw the introduction of the full width hub at the front. Known as the 'Salmon Tin' this had a parallel major diameter, as opposed to the '55 on hub ('Biscuit Barrel) which had a slightly convex major diameter,
Look here http://www.ajs-matchless.com/pic_display.asp?id=326 for '54 hub.Edited by - Biscuit on 21 Sep 2008 4:03:23 PM
A lovely machine in a beautiful setting.Edited by - Biscuit on 21 Sep 2008 4:04:53 PM
Look here http://www.ajs-matchless.com/pic_display.asp?id=326 for '54 hub.Edited by - Biscuit on 21 Sep 2008 4:03:23 PM
A lovely machine in a beautiful setting.Edited by - Biscuit on 21 Sep 2008 4:04:53 PM
- paul knapp
- Posts: 1645
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: SOUTH AUSTRALIA AUSTRALIA
Wheels
http://www.ajs-matchless.com/pic_display.asp?id=326
Too bad somebody has lit a fire there that has destroyed the grass and singed the bushes
Too bad somebody has lit a fire there that has destroyed the grass and singed the bushes
___“As a hobby for the technically minded, motorcycling provides great scope.”
J.B.Nicholson
Don't worry about the world coming to an end today. It's already tomorrow in Australia!
_____________________________________________
J.B.Nicholson
Don't worry about the world coming to an end today. It's already tomorrow in Australia!
_____________________________________________
- Biscuit
- Deceased
- Posts: 3924
- Joined: Thu Jan 01, 1998 12:00 am
- Location: KENT UK
- paul knapp
- Posts: 1645
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: SOUTH AUSTRALIA AUSTRALIA
Wheels
Nasty lot!
...
...
___“As a hobby for the technically minded, motorcycling provides great scope.”
J.B.Nicholson
Don't worry about the world coming to an end today. It's already tomorrow in Australia!
_____________________________________________
J.B.Nicholson
Don't worry about the world coming to an end today. It's already tomorrow in Australia!
_____________________________________________